- Made with 99.8% pure micronized silver.
|
- 78% to 82% silver content by weight.
|
- Extended temperature limits: -40C to > 160C
|
- New formula insures minimal viscosity change from 0C to 150C
|
- Thermal conductivity: 8.4 W/m K to 8.8W/m k (Hot Wire Method Per MIL-C-47113)
|
- Thermal Resistance: 0.0028C/W (0.001 inch layer with 1 square inch contact area)
|
- 2 to 7 degrees centigrade lower CPU core temperatures than other thermal compounds.
|
- Negligible electrical conductivity. Arctic Silver II was formulated to conduct heat, not electricity. It is only electrically conductive in a thin layer under extreme compression.
|
- While much safer than electrically conductive silver and copper greases, Arctic Silver II should be kept away from electrical traces, pins, and leads. The compound is slightly capacitive and could potentially cause problems if it bridged two close-proximity electrical paths.
|
- Arctic Silver II is now sold in 3 gram tubes. This is enough compound to cover 20 to 30 small CPU cores, or 7 to 12 large CPU cores, or 3 to 6 heat plates. At a layer 0.003" thick, it will cover approximately 18 square inches.
|
